Pilot Hole Size for #7 Wood Screws
#7 screws (0.151″ shank) turn up in general woodworking. Here are the three bits to chuck before driving one.
- Pilot — hardwood 7/64″0.109″ — receiving piece
- Pilot — softwood 3/32″0.094″
- Clearance 5/32″0.156″ — top piece
- Countersink 5/16″flat head flush
Rule Pilot matches the screw’s root so the threads cut instead of split; clearance clears the 0.151″ shank so the head can clamp. Size the pilot up 1/64″ in hard maple, hickory, white oak, or tropical hardwoods — and always for brass screws.
#7 screw questions
What size pilot hole for a #7 screw in hardwood?
Drill a 7/64″ (0.109″) pilot hole for a #7 wood screw in hardwood — oak, maple, cherry, walnut. In very hard stock like hard maple or hickory, go up 1/64″.
What size pilot hole for a #7 screw in softwood?
Use 3/32″ (0.094″) in pine, cedar, fir, and other softwoods — one size under the hardwood bit, because soft fibers compress around the threads.
What clearance hole does a #7 screw need?
5/32″ (0.156″) through the piece being fastened, just over the #7 shank’s 0.151″, so the screw slides through and clamps the joint instead of holding it apart.
What countersink fits a #7 flat head screw?
A 5/16″ countersink lets a #7 flat head sit flush. A #7 combination pilot-countersink bit drills pilot, clearance, and countersink in one pass.
← #6 screws · #8 screws → · Full chart & lookup · Screwing into a specific wood? Check its hardness in the species library.